Red High Strength Threadlocker
LOCTITE® 263
Product category: Threadlockers
Data sheets
- Description
- Technical specifications
LOCTITE® 263 is a red, high-strength, primerless threadlocker for permanently locking and sealing bolts, nuts and studs to prevent loosening due to vibration. It works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces without the use of primer. Proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluids.
-
Particularly suited for heavy duty applications such as studs into motor housings where high strength is required
-
Prevents fastener loosening and leakage from shock and vibration
-
Designed for the permanent locking and sealing of threaded fasteners
-
Requires heat for disassembly
-
Offers high temperature performance (up to 360°F) and oil tolerance
Agency approvals / certificates / specifications:
NSF/ANSI 61
Application method:
Dispense System,Manual
Application temperature:
-65.0 °F - 360.0 °F (-55.0 °C - 180.0 °C)
Applications:
Threadlocking
Breakaway torque, M10 Steel Nuts/Bolts:
33.0 N·m (290.0 in./lb.)
Color:
Red
Cure type:
Anaerobic Cure
Fixture time:
10.0 min.
Key characteristics:
Disassembly: Disassembly with Heat,Fluorescent,General Purpose,Oil Tolerant,Primerless,Strength: High Strength
Physical form:
Liquid
Prevail torque, M10 Steel Nuts/Bolts:
33.0 N·m (290.0 in./lb.)
Recommended for use with:
Metal,Metal: Passive Metal
Specific gravity, @ 25.0 °C:
1.1
Viscosity, 20 RPM:
500.0 mPa·s (cP)
How to use
It is recommended to use LOCTITE SF 7070 to degrease and clean surfaces prior to applying threadlocker.
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use LOCTITE SF 7649 activator. Allow to dry.
Apply a few drops of liquid threadlocker to the thread engagement area. Assemble nut and tighten to proper torque.
Apply several drops of liquid threadlocker into lower third of blind hole, as well as a few drops onto male threads, and then install male threads. Tighten to proper torque.
Assemble and tighten to proper torque requirement. If several bolts are being assembled, torque them down to the correct value within the fixture time window.
Disassemble with standard hand tools.
If disassembly is not possible using normal hand tools, apply localized heat to approximately 500°F/260°C. Disassemble while hot with standard hand tools.
For manual dispensing, the use of LOCTITE® EQ Pro Pump (for 50ml and 250ml bottles) or LOCTITE®Peristaltic Hand Pumps (50 ml or 250 ml versions) is recommended to ensure a consistent application volume.
For the disassembly of corroded or seized parts, use LOCTITE® LB 8040 Freeze and Release.
FAQ
Prevent vibration loosening, prevent leaks, protect threaded components from corrosion and increase the reliability of mechanical fasteners by using a LOCTITE® anaerobic threadlocking adhesive.
The standard continuous operating temperature range for LOCTITE® anaerobic adhesives is -65°F to +300°F (-55˚C to +150˚C).Depending on the specific application requirements, high-performance grades are also available offering increased temperature resistance. Please consult with the Henkel technical team for availability and grade selection.
Yes, Henkel's anaerobic adhesives become highly resistant thermoset polymers once cured, making them suitable for a vast number of applications. Consult our online product resources or contact our technical teams for further information.
Yes, these products are all anaerobic adhesives that will function in a similar way. Variations in the adhesive characteristics (viscosity, gap-fill, strength, etc.) will make them better suited to certain applications. Consult the product technical data sheets and/or Henkel representatives for further information.
All necessary H&S measures and PPE (personal protection equipment) requirements can be found on the product material safety data sheet, all of which are available via our website.
WANT
FREE INDUSTRY
INSIGHTS?
Subscribing to our newsletter is an easy way of keeping in touch with all the latest industry developments and scientific innovations. Be part of our fast-growing community and look forward to getting all the latest, first.