Magna-Crete
LOCTITE® PC 9410
Product category: Concrete repair materials
Data sheets
Safety
(8)
-
LOCTITE® PC 9410, 5 gal Mixed (kits, etc.)es_USIDH: 235573
-
LOCTITE® PC 9410, 5 gal Mixed (kits, etc.)en_USIDH: 235573
-
LOCTITE® PC 9410, 5 gal Mixed (kits, etc.)en_USIDH: 235573
-
LOCTITE® PC 9410, 5 gal Mixed (kits, etc.)es_USIDH: 235573
-
LOCTITE® PC 9410, 5 gal Mixed (kits, etc.)en_USIDH: 235573
-
LOCTITE® PC 9410, 5 gal Mixed (kits, etc.)es_USIDH: 235573
-
LOCTITE® PC 9410, 5 gal Mixed (kits, etc.)es_USIDH: 235573
-
LOCTITE® PC 9410, 5 gal Mixed (kits, etc.)en_USIDH: 235573
- Description
- Technical specifications
LOCTITE® PC 9410™ is a grey, 2-part, rapid setting, liquid magnesium phosphate-based concrete repair and grouting system that outperforms conventional concrete repairs. This product is typically used wherever concrete is used in the construction and roads industries. LOCTITE PC 9410 is typically used in applications with an operating range of -58° to 2012°F (-50°C to 1100°C).
-
This repair system can be applied at virtually any temperature without shrinkage
-
Is freeze/thaw and de-icing salt resistant
-
Bonds to new and old concrete as well as most construction materials including wood and steel
-
Its operating range is -50 °C to +1,100 °C
Application method:
Trowel
Applications:
Concrete Repair,Flooring & Grouting
Color:
Gray
Compressive strength, 1.0 yr.:
13000.0 psi (90.0 N/mm²)
Compressive strength, 2.0 hr.:
25000.0 psi - 3000.0 psi (17.0 N/mm² - 21.0 N/mm²)
Compressive strength, 28.0 day:
7000.0 psi - 8000.0 psi (48.0 N/mm² - 55.0 N/mm²)
Compressive strength, 3.0 day:
4000.0 psi - 6000.0 psi (28.0 N/mm² - 41.0 N/mm²)
Cure type:
Room Temperature (Ambient) Cure,Two Component Mix
Key characteristics:
Cure Speed: Rapid Cure,Freeze-Thaw Stable,Performance: High Performance,Salt Spray Resistant,Shrinkage: Non- Shrinking
Number of components:
2 Part
Physical form:
Putty
Recommended for use with:
Metal
How to use
Surface must be clean, dry, and free of loose materials for the best results. This can be achieved using a high pressure water based system that incudes LOCTITE® SF 7840™ cleaner/degreaser.
There is no set mix ratio for LOCTITE® PC 9410™. To mix, add the aggregate to the activator. It is suggested to start with a 5:1 ratio (aggregate:activator), only adding enough activator to get the consistency desired for the application.
Apply the mixture immediately after mixing. Depending on the consistency desired for the application, the mixture can either be poured or troweled onto the surface being repaired. Smooth to a finished surface.
FAQ
A successful application is largely dependent on surface preparation. The application surface must be free from all contamination. Removal of oil, grease, dust, chlorides, rust and for most products, moisture, will greatly enhance application success. For more detailed surface preparation techniques, refer to product description sheets.
WANT
FREE INDUSTRY
INSIGHTS?
Subscribing to our newsletter is an easy way of keeping in touch with all the latest industry developments and scientific innovations. Be part of our fast-growing community and look forward to getting all the latest, first.